Reg. 2 — Essential Parameters (Implementation) Regulations, 2012
Reg. 2 · Essential Parameters (Implementation) Regulations, 2012
(1) These regulations implement the requirements set Applicability or
by Regulation (EC) No 1222/2009 of the European Parliament and of otherwise
these
the Council of 25 November 2009 on the labelling of tyres with regulations.
respect to fuel efficiency and other essential parameters. This
Regulation establishes a framework for the provision of harmonised
information on tyre parameters through labelling, allowing end-users
to make an informed choice when purchasing tyres. In the
implementation of the above-mentioned Regulation (EC) No 1222/
2009 of the European Parliament and of the Council of 25 November
2009
(a)
these regulations shall apply to C1, C2 and C3 tyres;
(b)
these regulations shall not apply to
(i)
re-treaded tyres;
(ii) off-road professional tyres;
(iii) tyres designed to be fitted only to vehicles
registered for the first time before 1 October 1990;
(iv) T-type temporary-use spare tyres;
(v)
tyres whose speed rating is less than 80km/h;
(vi) tyres whose nominal rim diameter does not
exceed 254mm or is 635mm or more;
(vii) tyres fitted with additional devices to improve
traction properties, such as studded tyres;
(viii) tyres designed only to be fitted on vehicles
intended exclusively for racing.
(2) These regulations also implement the requirements set by
Commission Regulation (EU) No 228/2011 of 7 March 2011
amending Regulation (EC) No 1222/2009 of the European Parliament
and of the Council with regards to the wet grip testing method for C1
tyres.