Reg. 4 — TRAILERS (AMENDMENT) REGULATIONS, 2011
Reg. 4 · TRAILERS (AMENDMENT) REGULATIONS, 2011
For Schedule V to the principal regulations, there shall be
Substitutes Schedule
V to the principal
substituted the following:-
regulations.
“SCHEDULE V
PROCEDURES TO BE FOLLOWED WITH RESPECT TO EC TYPE-APPROVAL
0. Objectives and scope
0.1. This Schedule establishes the procedures for the proper operation of the vehicle type-approval in accordance with
the provisions of Article 9.
0.2. It also includes
(a) the list of international standards which are of relevance for the designation of the technical services in
accordance with Article 41;
(b) the description of the procedure to be followed for the assessment of the skills of technical services in
accordance with Article 42;
(c) the general requirements for the drafting of test reports by technical services.
1. Type-approval process
When receiving an application for vehicle type-approval, the approval authority shall
(a) verify that all EC type-approval certificates issued pursuant to the regulatory acts which are applicable for
vehicle type-approval cover the vehicle type and correspond to the prescribed requirements;
(b) by reference to the documentation make sure that the vehicle specifications and data contained in Part I of the
vehicle information document are included in the data in the information packages and in the EC type-approval
certificates in respect of the relevant regulatory acts;
(c) when an item number in Part I of the information document is not included in the information package of any
of the regulatory acts, confirm that the relevant part or characteristic conforms to the particulars in the information
folder;
(d) on a selected sample of vehicles from the type to be approved carry out or arrange to be carried out inspections
of vehicle parts and systems to verify that the vehicle(s) is/are built in accordance with the relevant data contained
in the authenticated information package in respect of the relevant EC type-approval certificates;
(e) carry out or arrange to be carried out relevant installation checks in respect of separate technical units where
applicable;
(f) carry out or arrange to be carried out necessary checks in respect of the presence of the devices provided for in
footnotes (1) and (2) of Part I of Schedule IV where applicable;
(g) carry out or arrange to be carried out necessary checks in order to ensure that the requirements provided for in
footnote (5) of Part I of Schedule IV are fulfilled.
B
2. Combination of technical specifications
The number of vehicles to be submitted shall be sufficient to permit the proper check of the various combinations
to be type-approved according to the following criteria
Technical Specification
Vehicle Category
M1 M2 M3 N1
X
X
X
X
X
X
-
-
-
-
Engine
X
X
X
X
X
X
-
-
-
-
Gear box
-
X
X
X
X
X
X
X
X
X
Number of axles
X
X
X
X
X
X
-
-
-
-
Powered axles (number, position
and interconnection)
X
X
X
X
X
X
X
X
X
X
Steered axles (number and position)
X
X
X
X
X
X
X
X
X
X
Body styles
X
X
X
X
X
X
X
X
X
X
Number of doors
X
X
X
X
X
X
-
-
-
-
Hand of drive
X
X
X
X
X
X
-
-
-
-
Number of seats
X
X
X
X
X
X
-
-
-
-
Level of equipment
3. Specific Provisions
Where no approval certificates for any of the relevant regulatory acts are available, the approval authority shall
(a) arrange for the necessary tests and checks as required by each of the relevant regulatory acts;
(b) verify that the vehicle conforms to the particulars in the vehicle information folder and that it meets the
technical requirements of each of the relevant regulatory acts;
(c) carry out or arrange to be carried out relevant installation checks in respect of separate technical units where
applicable;
(d) carry out or arrange to be carried out necessary checks in respect of the presence of the devices provided for in
footnotes (1) and (2) of Part I of Schedule IV where applicable;
(e) carry out or arrange to be carried out necessary checks in order to ensure that the requirements provided for in
footnote (5) of Part I of Schedule IV are fulfilled.
Appendix 1
Standards with which the entities referred to in Article 41 have to comply
1. Activities related to testing for type-approval, to be carried out in accordance with the regulatory acts listed in
Schedule IV
1.1. Category A (tests performed in own facilities)
EN ISO/IEC 17025:2005 on the general requirements for the competence of testing and calibration laboratories.
A technical service designated for category A activities may carry out or supervise the tests provided for in the
regulatory acts for which it has been designated, in the facilities of a manufacturer or of a third party.
1.2. Category B (supervising of tests performed in the manufacturer’s facilities or in the facilities of a third party)
EN ISO/IEC 17020:2004 on the general criteria for the operation of various types of bodies performing
inspection.
Before performing or supervising any test in the facilities of a manufacturer or of a third party, the technical
service shall check that the tests facilities and measurement devices comply with the appropriate requirements of
the standard referred to in point 1.1.
2. Activities related to Conformity of Production
2.1. Category C (procedure for the Initial Assessment and surveillance audits of the manufacturer’s quality management
system)
EN ISO/IEC 17021:2006 on the requirements for bodies providing audit and certification of management
systems.
2.2. Category D (inspection or testing of production samples or supervision thereof)
EN ISO/IEC 17020:2004 on the general criteria for the operation of various types of bodies performing
inspection.
B
Appendix 2
Procedure for the assessment of the technical services
1. Purpose of this Appendix
1.1. This Appendix establishes the conditions according to which the assessment procedure of the technical services
shall be conducted by the competent authority referred to in Article 42.
1.2. These requirements shall apply mutatis mutandis to all technical services, irrespective of their legal status (inde-
pendent organisation, manufacturer or approval authority acting as technical service).
2. Principles of assessing
Assessing shall be characterised by reliance on a number of principles
— independence which is the basis for the impartiality and objectivity of the conclusions,
— an evidence-based approach which guarantees reliable and reproducible conclusions.
Auditors shall show trust and integrity. They shall respect confidentiality and discretion.
They shall report truthfully and accurately findings and conclusions.
3. Skills required of the auditors
3.1. The assessments may only be conducted by auditors having the technical and administrative knowledge necessary
for such purposes.
3.2. The auditors shall have been trained specifically for assessment activities. In addition, they shall have the specific
knowledge of the technical area in which the technical service will exercise its activities.
3.3. Without prejudice to points 3.1 and 3.2 of this Appendix, the assessment referred to in Article 42 shall be conducted
by auditors independent of the activities for which the assessment is conducted.
4. Application for designation
4.1. A duly authorised representative of the applicant technical service shall make a formal application to the competent
authority that includes the following
(a) general features of the technical service, including corporate entity, name, addresses, legal status and technical
resources;
(b) a detailed description including curriculum vitae of the personnel in charge of testing and of the managerial
staff as evidenced by the skills both educational and professional;
(c) in addition to the above, technical services which use virtual testing methods shall provide evidence of their
ability to work in a Computer-Aided-x environment;
(d) general information concerning the technical service such as its activities, its relationship in a larger corporate
entity if any, and addresses of all its physical location(s) to be covered by the scope of designation;
(e) an agreement to fulfil the requirements for designation and the other obligations of the technical service as
applicable in the relevant Directives;
(f) a description of the conformity assessment services that the technical service undertakes in the framework of
the applicable regulatory acts and a list of the regulatory acts for which the technical service applies for
designation, including limits of capability where applicable;
(g) a copy of the quality manual of the technical service.
B
4.2. The competent authority shall review for adequacy the information supplied by the technical service.