Reg. 21 — Regulations, 2004
Reg. 21 · Regulations, 2004
Batteries for
After 31 December
X
electrical vehicles
2005, the placing on the
market of NiCd batteries
shall only be allowed as
replacement parts for
vehicles put on the
market before this date.
(1) By 1 January 2005 the Competent Authority shall assess whether the phase-out
time scheduled for this entry has to be reviewed in relation to the availability of
substitutes for lead, taking into account the objectives of regulation 5(2).
(2) See footnote 1.
(3) By 1 January 2005, the Competent Authority shall assess this exemption in
relation to road safety aspects.
(4) See footnote 1.
(5) Dismantling if, in correlation with entry 14, an average threshold of 60 grams
per vehicle is exceeded. For the application of this clause, electronic devices
not installed by the manufacturer on the production line shall not be taken into
account.
(6) Dismantling if, in correlation with entry 11, an average threshold of 60 grams
per vehicle is exceeded. For the application of this clause, electronic devices
not installed by the manufacturer on the production line shall not be taken into
account.
a maximum concentration value up to 0.1% by weight and per
homogeneous material, for lead, hexavalent chromium and mercury
and up to 0.01% by weight per homogeneous material for cadmium
shall be tolerated, provided these substances are not intentionally
introduced 1 ,
a maximum concentration value up to 0.4% by weight of lead in
aluminium shall also be tolerated provided it is not intentionally
introduced 2 ,
a maximum concentration value up to 0.4% by weight of lead in
copper intended for friction materials in brake linings shall be tolerated
until 1 July 2007 provided it is not intentionally introduced 3 ,
the reuse of parts of vehicles which were already on the market at the
date of expiry of an exemption is allowed without limitation since it is
not covered by regulation 4(2),
until 1 July 2007, new replacement parts intended for repair 4 of parts
of vehicles exempted from the provisions of regulation 4(2) shall also
benefit from the same exemptions.
Intentionally introduced shall mean deliberately utilized in the formulation of a
material or component where its continued presence is desired in the final product to
provide a specific characteristic, appearance or quality. The use of recycled
materials as feedstock for the manufacture of new products, where some portion of
the recycled materials may contain amounts of regulated metals, is not to be
considered as intentionally introduced.
See footnote 1.
See footnote 1.
This clause applies to replacement parts and not to components intended for normal
servicing of vehicles. It does not apply to wheel balance weights, carbon brushes for
electric motors and brake linings as these components are covered in specific