Art. 16 Decree on the Building Permit Procedure (Building Permit Decree, BewD) - Profile
Art. 16 Decree on the Building Permit Procedure (Building Permit Decree, BewD) - Profile · Profile
1. Applicants are required to stake out the external outlines of the construction project on the site and mark them with profiles simultaneously with the submission of the construction application. The profiles must indicate, particularly at the building corners, the heights of the facades and the slope of the roof lines, and for flat roofs, the height of the roof parapet or edge, as well as, if applicable, the total height at the relevant point. The height of the upper edge of the ground floor must be marked with a crossbar.
2. The profiles must remain in place until a final decision on the construction project has been made.
3. The building permit authority may issue special orders for the profiling or grant relaxations if important reasons require it. However, sufficient orientation for the neighbors and the public must be ensured.
4. If a construction project is not profiled according to regulations at the time of its announcement, or if the established profiles significantly deviate from the project plans, the announcement must be repeated once the defect is remedied, with a corresponding extension of the objection period.